Auto Pilot Panel with Stand

Açıklama

This is a general purpose auto pilot and control panel for use mainly with Microsoft Flight Sim, but can be used in any sim supported by Mobiflight.It has the most useful buttons and controls needed to use autopilot, as well as gear and flaps, in anything from a Cessna to an A320. Control functionality is provided by an Arduino mega2560 and MobiFlight software. You can use an Arduino Mega 2560 R3 or a Mega 2560 Pro Mini and other compatible cloned boards. Be warned the Pro mini is very small and will require good soldering skills. If you are unsure if your board is usable please check compatibility on the MobFlight website. https://www.mobiflight.com/en/index.htmlThis project does not contain any files or details on how to wire this panel.The full list of controls and the button/switch used is provided in the Excel spreadsheet with links provided to a UK based retailer. These of course can be swapped out for any switch or button you wish. I have provided all the STL and f3d files for Fusion 360 so you can edit and remix the design if you want. I'm still learning best practices for Fusion so the component file structure might not be the best but everything is there. I have an Ender 3 Pro which is a little too small to print the main parts in one piece. So there are 3 files for each of the front and rear plates and the main body to enable those with smaller printers to print them in 2 sections and larger printers can just print the single piece files.Front and rear plate…