WE AK Airsoft Misc set

Açıklama

English:A Collection of internals for the WE/WELL AK's, Made for my PMC. Use what you might find useful, however, I do not know if every part is fully compatible with the original set, since I have been modifying the original design of the pieces a bit to work better in my personal replica. I recommend using the hammer with the striker. It will lower the fps a tad, but at the same time, it reduces the stress on the striker, meaning it lasts longer(Specially if you don't dry fire and have the last shot brake on your magazine turned off).Pieces:Hammer: I recommend putting the hammer flat on the surface on the slicer, and enabling the supports, then you just need to remove the excess materials with a few tools. You'll figure it out, you're smart ;)Power downgrade discs: pretty self explanatory. I packed the ones I found most useful. I doubt it will chrono the same for other replicas, but using the whole kit I got around 300-330 fps with 0.20g bbs with the 2.25mm diameter hole, and 390 with the 3mm. It's only a 7mm diameter disc by 1mm thickness, so I recomend making one yourself. It goes inside the nozzle, and they are surprisingly consistent.Hop up nubs: Tried the square one, and it works pretty well, and I am currently using the round one. I can't really find that much of a difference, specially on the platform, but there it is.Striker: It strikes the gas valve. I extended, and added more face to the striking face, so it hits the valve better, however, this creates the need…