Intex Nozzle Outlet V2 *fixed* * stronger*

Açıklama

3DKit made this very nice outlet which fits Intex pools with 32mm hoses. (I don't know if 38mm has the same inlets, they appear to be bigger).There was just one little flaw, at the edge of the top layer of the lower part, there was only one layer of filament. This created a layer that was not closed and it was very weak. I even printed the one 3DKit labeled as "Reinforced" but sadly that dit not fix the problem for me.So i applied a dirty fix in Fusion 360.I imported the stl into Fusion, added a 1mm layer at the weak spot and rounded the edges a bit. It's not pretty, but it works. Now that part is 5 layers thick when printing at 0.2mm layer height.I printed it and now it has a strong top layer.The credits of the original design go to 3DKit of course. Maybe 3DKit will create a better fix someday?Print this with supports touching build plate. I used PLA+ for testing, but it probably won't last long in chlorinated water. Maybe PETG would be a better choice. I used 0.2 layer height and 1.2mm walls and top/bottom setting.