Attitude adjuster

Açıklama

A friend asked for a "3D printed attitude adjustment," ostensibly for himself, but we all know who he meant. Anyway, an adjustment is an abstract, and I've never had good luck with abstract filament, so I made an attitude adjuster instead, and he can do it himself.Based on the attitude indicator "artificial horizon" from aircraft, specifically the bezel from Kyle2025's design, also using gears by WorksBySolo and a knob from RasmusAdditive. Pretty easy print of five pieces, simple assembly. It works, but only to adjust roll - if you need to adjust pitch, turn it sideways.Supports are necessary for the AttAdj-Face and AttAdj-Gear - make sure both are pretty clean for smoother operation. Doing a 3-color filament change is recommended if you have the colors, it looks much better (even better if your z-offset isn't wandering like mine was for this print.)Place the AttAdj-Gear in the small hole in the AttAdj-Back, stem facing up. Put AttAdj-Face atop that, facing up. Put AttAdj-Bezel on top over stem of AttAdj-Gear with a drop or two of glue as needed to attach to AttAdj-Back, glue AttAdj-Knob to stem on AttAdj-Gear. Done.Color-change printing: For .2mm layers (.25 initial,) use sky blue or similar to layer 20 or 4.05mm. Brown/tan/whatever to layer 22, 23, or 24, 4.45 to 4.85mm or thereabouts - not crucial. White for remainder.