Modular Adjustable GPU Support Stand

Açıklama

Modular Adjustable GPU Support StandA modular GPU support stand with adjustable height, a magnetic base, and interchangeable contact pads. This support stand is designed to support long or heavy graphics cards. The model consists of separate modular parts in different lengths: a base, an adjustable top section, and a contact pad. A magnetic holder for the base is also included, along with 3D-printable nuts and bolts in case metal nuts and bolts are not available.Information about the modelHeight ranges:50-60 mm70–95 mmDifferent combinations of parts may result in other height ranges.Included contact pad options:Flat round padPad with cushion insert recess90° corner padThe stand uses an M6 nut and bolt for adjustment and support. Metal nuts and bolts are recommended for strength and durability. Printed nuts or bolts should only be used for testing, mockups, or very light use. Use printed nuts and bolts at your own risk.PrintingMeasure the distance from the bottom of the PC case to the graphics card (see picture attached).For the GPU stand, you need the following parts (see picture attached):Magnetic holder (optional)Base (choose the required length or try different variations)Adjustable top (choose the required length or try different variations)M6 × 30 mm bolt for the 50–60 mm stand, or M6 × 50 mm bolt for the 70–95 mm standM6 nutSpacer for M6 metal nut (optional)Pad (choose one)Recommended print settings:80%+ infill for 3D-printed nuts and bolts20%+ infill for other…