DXR2 Blade Inserts

Açıklama

Here is a set of inserts I created for the stock DXR2 Dozer Blade. I mounted the inserts to a stock blade using the second hole from the top and the 2 holes going into the stock blade. The bottom 2 holes I drilled and tapped for 3mm screws. The one hole in the side I drilled a hole for a 3mm screw and used a locknut on the outside. The inserts have a step in there where you can add a replaceable leading edge blade you can make out of 2mm thick metal. I cut it to shape and bolt it in place using 3mm bolts and locknuts. Any questions just ask. Here is a video of the DXR2 stock blade with the 3D Printed inserts installed working in sand: https://youtu.be/daQ4_nrh-Hk?si=W1QodtxJE66z0pSg The inserts work well and can be removed at any time.