Dirt Devil upright vacuum REPLACEMENT WHEELS/REPAIR KIT

Dirt Devil upright vacuum REPLACEMENT WHEELS/REPAIR KIT

Ücretsiz STL Aletler
  • 17 görüntülenme

Bu model Cults3D üzerinde barındırılıyor. Dosyalar, görseller ve lisans bilgileri tasarımcısına aittir.

Cults3D üzerinde görüntüle ↗

Açıklama

I have a Dirt Devil upright vacuum and the wheels are badly designed, plastic on plastic friction has worn down and they were falling off Theses are parts to repair the wheels: Sleeve A and B: the wheels were damaged but their mounting holes were too, glue the sleeves inside and outside of the mounting holes to repair the body of the vacuum so you can install the new wheels Wheel + washer: the original wheels are press fit, the 3d model has 2 parts, you will need a pair of screws and bolts to mount them WireRIM and "Tire": These are decoration i added for fun. Glue the "tire"bulge on the flat side of the wheel, then press the WireRim inside, the rim propably holds on without glue.

Bu model hakkında

Dirt Devil upright vacuum REPLACEMENT WHEELS/REPAIR KIT, Cults3D topluluğunda paylaşılan ücretsiz bir Aletler 3D modelidir. 3D baskı için indirebilir ve orijinal lisans koşulları çerçevesinde kendi projelerinde kullanabilirsin.

Dosya formatları

  • STL — 3D baskı için en yaygın mesh formatı — neredeyse her yazıcıda dilimlenip basılmaya hazır.

Bu modelin dosyaları Cults3D üzerinde barındırılır. Orijinal sayfayı açıp indirmek için yukarıdaki düğmeyi kullan.

Benzer modeller