skeleton action figure model / NO AMS / free

Açıklama

ball-jointed action figure, fully printable in separate parts NO AMS The ball joints are printed separately. I recommend printing them in high detail PET-G with 50% infill to ensure strength The best option for printing joints is to print the mortise from PET-G filament with 50% infill, and the tenon from TPU filament with 20% infill. Personally, I used Prusament TPU 95A, and this makes the joint virtually unbreakable and perfectly strong. All parts of the body have one side that is always flat—place the object on the build plate with that flat side down. Then add supports for overhangs up to 45 degrees. The joint has the same dimensions for all body parts, so simply copy one joint model and insert it seven times. After printing, glue the joints into the pre-prepared slots, then assemble the body parts together. The height of the assembled figure is 19 cm. Redistribution of the 3D STL files is prohibited. This model will be available for download exclusively here on my Cults profile. I would appreciate every like and every make—thank you saved in STL 1.head 2.body 3.arm R-L 4.leg R-L 5.foot R-L 6. hand R-L 7. scythe 1-2 9.sign 1-2-3 ball joints saved in STL 1.mortise 2.tenon 3. tenon for TPU action figures collection: https://cults3d.com/en/design-collections/ARTMAN/action-figures Fish models : https://cults3d.com/en/design-collections/ARTMAN/fish-sculptures reliefs collection: https://cults3d.com/en/design-collections/ARTMAN/reliefs woodworker /3D printing…