Thrustmaster Warthog DMS switch

Thrustmaster Warthog DMS switch

Ücretsiz STL Sanat ve Heykel
  • 12 görüntülenme

Bu model Cults3D üzerinde barındırılıyor. Dosyalar, görseller ve lisans bilgileri tasarımcısına aittir.

Cults3D üzerinde görüntüle ↗

Açıklama

I made a replacement DMS switch for the Thrustmaster Warthog. This version is slightly different from the one that comes with the stick originally, but it is found on some real F-16s. In my opinion, it makes the switch a bit easier to manipulate. I have provided two versions: one is slightly taller than the other. Installation: The stick must be disassembled to install this part, but the process is not too difficult. Loosen the screw holding the spring and remove the original hat from the switch. Simply slot the new part in place and reassemble the stick.

Bu model hakkında

Thrustmaster Warthog DMS switch, Cults3D topluluğunda paylaşılan ücretsiz bir Sanat ve Heykel 3D modelidir. 3D baskı için indirebilir ve orijinal lisans koşulları çerçevesinde kendi projelerinde kullanabilirsin.

Dosya formatları

  • STL — 3D baskı için en yaygın mesh formatı — neredeyse her yazıcıda dilimlenip basılmaya hazır.

Bu modelin dosyaları Cults3D üzerinde barındırılır. Orijinal sayfayı açıp indirmek için yukarıdaki düğmeyi kullan.

Benzer modeller