Elven Guard Guard Post & Pavilion - Modular Structure by Making Tlon

Elven Guard Guard Post & Pavilion - Modular Structure by Making Tlon

USD 15.00 STL Diğer
  • 14 görüntülenme

Bu model MyMiniFactory üzerinde barındırılıyor. Dosyalar, görseller ve lisans bilgileri tasarımcısına aittir.

MyMiniFactory üzerinde görüntüle ↗

Açıklama

Part of Tribes and Patreon March 2025 release. https://www.patreon.com/makingtlonThis set is part of - the Elven Guard Guard Post & Pavilion Bundle - and the Trees of the Eternal Vigil Bundle The aim for this structure was to create an above the ground Guard Post that would read as Elven architecture, combining decoration and functionality. That is why I went both with, for example, arrow slits in the walls, but also leaf and tree decoration patterns. The one shown in the banner (on the right) is a mixed structure: I decided to put an open wall on one side to show the variety of the set, but you can substitute any of the walls with fully closed ones, with those with arrow slits or even with fully open ones to make a pavillion like structure. As the renders show there are also different balcony options, with different railings which you can decor with shields coming from the Objects and Props packs by cutting the handles at the desired length. I also designed a kitbash bridge and stair set. With those you can create your own bridges and stairs by using string or hobby rope (which I suggest doing) combined with the "steps" given in the set: there are a few of those with different wood textures so that they will not all look the same. Alternatively, you can use the resin version of those - which require glue to assembly. These, however, are very delicate models in terms of printing quality, bending, etc (depending on your printer, settings and resin) because of the nature of…

Bu model hakkında

Elven Guard Guard Post & Pavilion - Modular Structure by Making Tlon, MyMiniFactory topluluğunda paylaşılan ücretli bir Diğer 3D modelidir. 3D baskı için indirebilir ve orijinal lisans koşulları çerçevesinde kendi projelerinde kullanabilirsin.

Dosya formatları

  • STL — 3D baskı için en yaygın mesh formatı — neredeyse her yazıcıda dilimlenip basılmaya hazır.

Bu modelin dosyaları MyMiniFactory üzerinde barındırılır. Orijinal sayfayı açıp indirmek için yukarıdaki düğmeyi kullan.

Benzer modeller