Karlach's Axe

Açıklama

Dangerous Ladies' 3D models for Karlach's Axe. Model by Jennifer Rezny (@quicksparrows) .stl format. Pre-sliced for printing on a 250mm tall bed, but I've included whole versions for people who would like to recut on their own. It's designed so the blades can pop off the handle on two 1/2" magnets each (8 magnets total!) You can also just glue them in place. The head can also slot off the pipe. This is handy for travel and storage, as it can pack down small. Assembles on a 1.5" wooden dowel for the handle, cut 48" long to finish at 60", but can be cut to the length of your choice. Files include: - Photos - .STL files We printed ours at 0.15 layers. We suggest keeping a moderate infill (no lower than 15%) and walls of about 1.2-1.4mm. If you are printing the hollow version, you may wish to just print it with solid walls/infill for strength. Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced. Feel free to tag us to show us what you print and make! We love to see finished works. http://dangerousladies.ca https://bsky.app/profile/dangerousladies.ca http://instagram.com/thedangerousladies