Arcade Stick support replacement

Açıklama

This design is a replacement for the bracket on a Sanwa type arcade lever with individual push buttons. The original part is screwed to the metal plate and the threads break with use. It has M3x5x5 metal inserts (5 mm long - 5 mm diameter) in the center and for the restrictor plate (version 2.0), and M4x6x4 metal inserts (4 mm long - 6 mm diameter) for the outside. It is recommended to print in PETG/ABS or some material with carbon fiber / fiberglass or nylon, with 100% filler for more strength. Layer height 0.20 or less. Version 2.0 has metal inserts and a custom restrictor plate with M3 screws. This design is a replacement for the support bracket on a Sanwa-style arcade joystick with individual switches. The original part is screwed to the metal plate, and the threads will break with use. It uses M3x5x5 metal inserts (5 mm long - 5 mm diameter) in the center and for the restrictor plate (version 2.0), and M4x6x4 metal inserts (4 mm long - 6 mm diameter) for the exterior. It is recommended to print in PETG/ABS or a material with carbon fiber/fiberglass or nylon, with 100% infill for greater strength. Layer height 0.2 or less. Version 2.0 includes metal inserts and a custom restrictor plate with M3 screws.