FPV Drone

Açıklama

Designed for experienced FPV pilots who want a responsive, stable, and easy-to-maintain platform optimized for acrobatic, freestyle, and FPV flight. Specifications • Frame weight: ~95 g (PETG or PA-CF) • Total weight (AUW): ~280–350 g (without battery) • Battery compatibility: 3S–4S 1300–4500 mAh including two adapters • Maximum prop size: 5" • FPV camera mount: 19 mm (Foxeer Cat 4 Micro) • FC/ESC mounting pattern: 30.5 × 30.5 mm • Motor mounting pattern: M3, 16 × 16 mm • GPS mount: integrated on the top cover (Matek M9N-5883) Printing recommendations • Ideal material: PETG or Nylon-CF for stiffness and impact resistance • Alternatives: PLA+ (for testing), ASA (for outdoor use) • Tip: print the top cover (GPS housing) separately in TPU for AMS 95 shore, which is stiffer than standard TPU and provides better mechanical support. • Assembly note: insert M2 and M3 brass threaded inserts in the dedicated holes before assembly to ensure a strong and durable connection between the printed parts. Required hardware • 4 × M3 × 25 mm screws (motors) • 8 × M3 × 8 mm screws (FC/ESC stack) • 4 × M3 anti-vibration dampers • 1 × Low-ESR capacitor 1000 µF 35 V on the main power line • M2 and M3 brass inserts for canopy and frame joints Recommended setup • Flight Controller / ESC: SpeedyBee F4 V4 55A Stack • Motors: iFlight Xing-E 2207 2750 KV • Props: HQProp 5×4×3 / Gemfan 51433 • Camera: Foxeer Cat 4 Micro (19 mm) • VTX: Eachine TX805 40CH (25–800 mW) • Receiver: FlySky FS-IA6B (iBUS) •…