Terramaster F8 SSD Plus - 120mm Fan Mod Shell

Ücretsiz STL Diğer

9 görüntülenme

Bu model Cults3D üzerinde barındırılıyor. Dosyalar, görseller ve lisans bilgileri tasarımcısına aittir.

Açıklama

Upgrade your NAS with a custom 3D-printed shell designed for a standard 120mm fan. The default 2 fans are not good enough for cooling, so I've created this custom shell, and the air flow is significantly increased. Please use a 14mm fan. Suggested to seal half of the ventilation. It is not using the standard 4-pin wire. Please also prepare a wire (standard 4-pin to JST XH2.54) Key Benefits: Quiet & Powerful Cooling: Fits any standard 120mm fan for superior airflow and dramatically lower noise. Perfect Fit: A direct, drop-in replacement that maintains all original screw holes and port alignments. What You'll Need: A simple JST-XH to 4-Pin PWM adapter cable to connect your new fan. To print in PETG or ASA for the best heat resistance. Note: This is a third-party mod. Installation is at your own risk and may void the device's warranty.

Bu model hakkında

Terramaster F8 SSD Plus - 120mm Fan Mod Shell, Cults3D topluluğunda paylaşılan ücretsiz bir Diğer 3D modelidir. 3D baskı için indirebilir ve orijinal lisans koşulları çerçevesinde kendi projelerinde kullanabilirsin.