Vampire Wall Plate

Ücretsiz STL Diğer

13 görüntülenme

Bu model Cults3D üzerinde barındırılıyor. Dosyalar, görseller ve lisans bilgileri tasarımcısına aittir.

Açıklama

This is a 3 piece Light Switch cover plate. When the lights are on, the face has blue eyes and no fangs. When the lights are off, the fangs come out and the eyes turn red! These files are designed to be used with a multi filament unit like the AMS from Bambu. I designed this so that you can easily paint the different areas whatever color you'd like. The current switch plate comes off and you use the same 2 screws to attach the new vampire BASE PLATE. As shown in the attached photos. Do not over tighten and make sure there is a little room behind the BASE PLATE for later use. Next, with the switch in the "on" position you set the SLIDER PLATE onto the switch. Lastly, all you have to do is hook the top of the FACE PLATE over the BASE PLATE and push the bottom on. Super simple and great for kids' bedrooms and definitely will make for a conversation piece! HALLOWEENSTL

Bu model hakkında

Vampire Wall Plate, Cults3D topluluğunda paylaşılan ücretsiz bir Diğer 3D modelidir. 3D baskı için indirebilir ve orijinal lisans koşulları çerçevesinde kendi projelerinde kullanabilirsin.