S.A.B.E.R. Core

Açıklama

This file is just the core of the S.A.B.E.R. system. I wanted to include this file separate for easy access. This core is designed for 1" diam. USB-C TXQ neo saber cores. It is fully compatible with all parts in the S.A.B.E.R. system.To build a complete saber, you need:• 1× Core (this file)• 1× Emitter• 1× Shroud• 1× Pommel• A standard 1" Neopixel or baselit core• A standard 1" lightsaber bladeAll components are fully interchangeable across the S.A.B.E.R. system. You can mix, match, and create your own unique saber. For more information, check out my Ko-fi page: https://ko-fi.com/brisingr42Recommended Print SettingsBasic Settings:• Layer Height: 0.16–0.2 mm• Infill: 15–25% (Cubic or Honeycomb recommended)• Walls: 3–4 perimeters• Supports: MinimalMaterial Recommendations:• PLA – great for cosplay, display, or light use• ABS / Nylon – recommended for dueling and heavy useLicense (S.A.B.E.R. System)The S.A.B.E.R. System is licensed under Creative Commons Attribution 4.0 (CC BY 4.0).You are free to:• Share — copy and redistribute• Adapt — remix, transform, and build upon• Use commercially(Sell it if you must—but I worked hard to make this free. Don’t make me regret it.)❗ You must provide proper attribution.Attribution must include:• Title: S.A.B.E.R. (and specific pack/part name if applicable)• Author: Joshua Crum (Brisingr / Brisingr42)• Source: ko-fi.com/brisingr42• License: CC BY 4.0Example: S.A.B.E.R. Knight Pack – Oath © 2026 by Joshua Crum is licensed under CC BY 4.0An…