GWS E-Starter motor mount

GWS E-Starter motor mount

Ücretsiz STL Sanat ve Heykel
  • 9 görüntülenme

Bu model Cults3D üzerinde barındırılıyor. Dosyalar, görseller ve lisans bilgileri tasarımcısına aittir.

Cults3D üzerinde görüntüle ↗

Açıklama

This motor mount enables the use of a direct-drive brushless motor as an alternative to the original geared setup. It is designed specifically for the Emax CF2822 1200KV motor paired with a 9x4.7 Slow Flyer propeller. To prevent overheating, please monitor the current draw; if the motor runs too hot, consider switching to an 8x4 electric propeller for better thermal management. A CG mount is also provided, to reduce the weights needed on the firewall. I removed all the weights on the firewall and stuck them on the CG mount with epoxy

Bu model hakkında

GWS E-Starter motor mount, Cults3D topluluğunda paylaşılan ücretsiz bir Sanat ve Heykel 3D modelidir. 3D baskı için indirebilir ve orijinal lisans koşulları çerçevesinde kendi projelerinde kullanabilirsin.

Dosya formatları

  • STL — 3D baskı için en yaygın mesh formatı — neredeyse her yazıcıda dilimlenip basılmaya hazır.

Bu modelin dosyaları Cults3D üzerinde barındırılır. Orijinal sayfayı açıp indirmek için yukarıdaki düğmeyi kullan.

Benzer modeller