Open storage tower (customizable)

Açıklama

-The tower's dimensions are 80 mm x 80 mm-The tray's dimensions are 150 mm x 110 mm-The stand's dimensions are 120 mm x 120 mm-Infill: 10% for everything except the tower's blocks-Infill for the tower's blocks: 20%-Put support when printing except for the threaded part in the tower's block and the threaded part for the tray-When printing the screw, lay it down and put support (easier to remove support that way)-The support is not needed for the cap of the screw-You may need to hammer all the pieces together (gently) because the tolerances are close-I suggest that if you when more than 1 story, you put the tray in the opposite direction when puting it together to help with better stability-Printed with PLA