Small Box With Lid - Randomius

Small Box With Lid - Randomius

Ücretsiz STL Düzenleyici ve Saklama
  • 9 görüntülenme

Bu model Creality Cloud üzerinde barındırılıyor. Dosyalar, görseller ve lisans bilgileri tasarımcısına aittir.

Creality Cloud üzerinde görüntüle ↗

Açıklama

It´s just a small box with a lid.Print Settings"This is just the settings i used. Results may vary depending on your printer, settings and/or filament.""I would recommend going with a setting that you know works for you."Ender 3 V3 KE printer, 0.1mm layer hight, 30 % infill, PLA material.Supports for the Lid and Hat.Assembly"Some light sanding might be needed depending on your printers tolerances.""Glue might be needed if parts are too lose."Put the peg into the Hat, then put the Hat and Peg assembly into the hole in the Lid."The PEG is just a pin to hold the hat and lid together."

Bu model hakkında

Small Box With Lid - Randomius, Creality Cloud topluluğunda paylaşılan ücretsiz bir Düzenleyici ve Saklama 3D modelidir. 3D baskı için indirebilir ve orijinal lisans koşulları çerçevesinde kendi projelerinde kullanabilirsin.

Dosya formatları

  • STL — 3D baskı için en yaygın mesh formatı — neredeyse her yazıcıda dilimlenip basılmaya hazır.

Bu modelin dosyaları Creality Cloud üzerinde barındırılır. Orijinal sayfayı açıp indirmek için yukarıdaki düğmeyi kullan.

Benzer modeller