Dwarf on Owlbear - SpedTeachUSMC

Açıklama

You will need to scale down this model as I wanted a very large piece.Recommended PLA Settings for This Model (FDM)Nozzle Temperature200–210 °CPLA typically prints well between 190–220 °C, depending on filament brand.For miniatures:Lower temp = sharper detailsHigher temp = stronger layersSweet spot: 205 °CBed Temperature55–60 °CPLA generally adheres well around 50–60 °C, which helps prevent lifting on the first layer.Layer Height (Most Important Setting)If using a 0.4 mm nozzle:Quality Layer HeightStandard 0.12 mmHigh detail 0.08 mmUltra detail 0.06 mmFDM miniature users often print around 0.08 mm layers to improve detail.Print SpeedSlow speeds dramatically improve detail.Recommended:Setting SpeedPrint Speed 35–45 mm/sExternal Walls 20–25 mm/sFirst Layer 15 mm/sSlower printing improves surface detail and layer bonding.CoolingPLA needs strong cooling for detail.Fan settings:Layer FanFirst layer 0–20%After layer 3 100%Wall / Shell SettingsSetting ValueWall Count 3Wall Thickness ~1.2 mmMatching wall thickness to nozzle multiples (like 1.2 mm for a 0.4 mm nozzle) helps prints look cleaner.InfillFor a miniature like this:15–20% infillPattern:GyroidCubicSupports (Critical for This Model)Use Tree Supports.Recommended:Setting ValueSupport Type TreeDensity 12–15%Placement EverywhereOverhang Angle 50°Tree supports reduce scarring on details.Orientation (Very Important)Do NOT print it standing straight up.Best orientation:Tilt model:30–40° backwardsThis:improves layer…