FPV camera mod bundle for craycle stick (AIO systems are included)

Açıklama

After getting acquainted with the simple but very interesting and carefully designed “stick” aircraft by craycle, I wanted to make a mod for FPV piloting using goggles, which is not included in the basic design package. So I developed a set of mounts for cameras ranging in size from 14 to 22 mm. I also developed mounts for AIO format cameras (FPV camera + VTX + antenna), which can be used as mounts for conventional FPV cameras with increased clearance (10 mm) for a better view. The mounts weigh 2-3 grams, so they will not significantly affect the balance of the aircraft. The camera mount is installed using CA glue, which you will use during the general assembly of the aircraft. Just add a few drops of glue to the camera mount or the modified hatch itself, and connect them together by inserting them into the slots. Secure the glue with a hardener. Done! I recommend using low-power 100-800 mW VTX systems or, even better, AIO systems. This is not a long-range aircraft, so there is no point in overloading it in terms of weight or voltage. Also, more powerful systems may experience overheating problems, which cannot be fully prevented. The kit includes: - Modified hatch for mounting an FPV camera - Modified fus (fs1) for mounting an FPV camera - 14mm camera mount - 19mm camera mount - 19mm camera mount type2 (4 screws) - 22mm camera mount - 14-14.5mm mount for AIO system - 19-19.5mm mount for AIO system - 19-19.5mm mount type2 for AIO system (4 screws) - 22-22.5mm mount for AIO…