Amazon Echo Dot Lighting Dock by John

Açıklama

Good Evening or Morning! (small revision to M3 instead of M4 for the assembly screws) So, this is a LED desktop or night stand lamp for the Amazon Echo Dot v2. I designed this in Fusion 360 with inspiration from the ongoing contest here on MyMiniFactory sponsored by Sindoh. I designed this in Fusion 360 with 3d printing in mind. It does require only very minimal support for the micro USB plug in on the back of the device. The tolerance should work well for most any minimally calibrated printer. The echo dot drops into the base and plugs in as normal. The LED light source could be just about anything you want but I opted for a 12-SMD (available in white and blue) dome light as widely used in many vehicles. This is a 12-volt light so it can be wired into any 12v adapter with an inline switch if desired. I will also post a 6v (USB driven) light so those with soldering skills or more advanced users could modify the single USB cable to power both the Amazon Echo Dot and the single LED. (optional light sources and upper arms included) I made this since I use the Echo Dot here at my desk for music and/or useless information :). From time to time I need a bit of additional light to help illuminate my workspace or it could be used as soft mood light as well. More pictures to follow as well as assembly and final product. Easy print with minimal support. I recommend .15-layer height; 22% infill, 2 or 3 walls and 4-5 top layers. Please let me know if you have any questions. Materials…