Vintage Russian(Soviet) Lens Re-housing, Industar-61 52mm F2.8 (M39 mount - Rangefinder camera lens)
- 13 görüntülenme
Bu model Cults3D üzerinde barındırılıyor. Dosyalar, görseller ve lisans bilgileri tasarımcısına aittir.
Cults3D üzerinde görüntüle ↗Açıklama
This custom lens Re-housing is optimized for "Industar-61 52mm f/2.8 (M39 mount)". For more information on the lens, please refer to the link below. http://www.sovietcams.com/index.php?346352902 Industar-61 has been manufactured for about 40 years, and various versions exist. Despite the similar appearance, the optical focal lengths such as 50mm, 52mm, and 55mm are also slightly different. This custom lens housing has not been tested for the possibility of mounting on other versions of Industar-61 lenses of similar appearance. The Industar-61 is one of the cheapest vintage lenses. (There are various evaluations of this lens.) I think, "There is no lens that is bad in this world," so I would like to say that this lens is also a lens with a unique charm. Of course, I don't use it often and always stay in the corner of the showcase, so in most cases I even forget its existence. One of the main elements that I don't use often is a compact and lightweight lens, but the structure is very inconvenient to operate. The focus ring is too close to the rear of the lens to be difficult to manipulate, and the front aperture ring is also very small, which is inconvenient. It's made entirely of the space-age wonder metal, aluminum and the aluminum is easily deformed by light impact. I thought about making this lens a re-housing design that compensates for the drawbacks caused by the old-fashioned appearance. Designed to be secured with grub screws (M4 x 4mm) to prevent the housing from…
Bu model hakkında
Vintage Russian(Soviet) Lens Re-housing, Industar-61 52mm F2.8 (M39 mount - Rangefinder camera lens), Cults3D topluluğunda paylaşılan ücretsiz bir Gadget ve Aksesuar 3D modelidir. 3D baskı için indirebilir ve orijinal lisans koşulları çerçevesinde kendi projelerinde kullanabilirsin.
Dosya formatları
- STL — 3D baskı için en yaygın mesh formatı — neredeyse her yazıcıda dilimlenip basılmaya hazır.
Bu modelin dosyaları Cults3D üzerinde barındırılır. Orijinal sayfayı açıp indirmek için yukarıdaki düğmeyi kullan.