Front Brake Cable Guide

Açıklama

This print guides the brake cable up the fork so it doesn't get clipped by a tree or shoved into the brake rotor. It also lets the cable glide freely through the clip to move with the suspension. Designed for a 44/46mm diameter fork tube on my E-Ride Pro SS 2.0 with a 6mm brake line, but will work on any fork tube that's close to those dimensions. If you would like a different diameter fork tube cable guide, please comment, and I can modify the design. There's 2 download files for the different sizes. This is one of the 2 pieces needed to make a full guide, so duplicate the model or print it twice. To install, take 2 pieces and wrap them around the fork, making sure the cable is in the center. Then wrap a zip tie around the whole fork and the 2 pieces, and tighten it down! If you're using more than one guide, make sure to align them so the cable can move freely up and down as the front suspension compresses.