Nutcracker Mouse Flexi by ChibiBestiary

Açıklama

Hey all, this little nutcracker styled mouse is ready to go! He prints in two parts - mouse and sword. The sword slips into his hand from the side (push the right side of the sword into the mouse's hand at an angle and then press the rest of the sword in). Final picture shows the angle to put the sword at. I used 5 colors for printing him - you can easily change that if you would prefer only 4. The 5th color is white, for his front teeth and eye shine. If you have never tried five colors with an AMS before, here is how that works: On the print screen pop up you will see five colors to path to your AMS. For this print you will want to path the white color to the pink slot. After the pink of the ears and tail finish printing, Manually remove the pink filament from your AMS and put in white. You can add a pause before the white starts printing if you need to, but there are quite a few layers before the white starts so I just changed it without pausing. Print Settings: Print in Place No Supports needed 2-3 walls 5-10% infill If you have adhesion issues, try a brim, glue stick or Aquanet hairspray Test printed successfully down to 75% size, though the sword is a little harder to snap in. | Download free and paid 3D printable STL files