RT-85 Exoskeleton

RT-85 Exoskeleton

Ücretsiz STL Diğer
  • 13 görüntülenme

Bu model Cults3D üzerinde barındırılıyor. Dosyalar, görseller ve lisans bilgileri tasarımcısına aittir.

Cults3D üzerinde görüntüle ↗

Açıklama

A sleek and easy to print exoskeleton for the Retevis RT-85. It's designed to cover the PTT and adjacent buttons from being accidentally pressed. Installation: Remove the two phillips screws on the back of the radio and the beltclip is attached. Place the exoskeleton over the buttons lining up the two mounting holes. Replace the beltclip if used and reinstall the two phillips head screws.

Bu model hakkında

RT-85 Exoskeleton, Cults3D topluluğunda paylaşılan ücretsiz bir Diğer 3D modelidir. 3D baskı için indirebilir ve orijinal lisans koşulları çerçevesinde kendi projelerinde kullanabilirsin.

Dosya formatları

  • STL — 3D baskı için en yaygın mesh formatı — neredeyse her yazıcıda dilimlenip basılmaya hazır.

Bu modelin dosyaları Cults3D üzerinde barındırılır. Orijinal sayfayı açıp indirmek için yukarıdaki düğmeyi kullan.

Benzer modeller