Drink Stand (Large Bottle)

Açıklama

This is a Drink Stand designed to handle shaker bottles and other liquid containers in the 16-32oz range. Unlike a standard coaster, this is designed to help resist tip-overs due to accidents and/or pets. Included with this design are two adapter rings design to support the taller form-factors of the Coldest and Stanley 36+ oz containers. I print with a 15% Gyroid infill and often use a brim with large objects. This affects filament usage and print times: Filament (g): - Drink Stand = 159.88 - Drink Stand - Adaptor - Coldest = 52.19 - Drink Stand - Adaptor - Stanley = 49.40 Total Materials: 159.88 - 212.07g # = Requires Supports Notes: The tray itself can hold nearly 8oz of condensation/leakage before overflowing. An adapter could theoretically be merged with the stand itself for a one-piece print, but it would require supports as the adapter extends down a ways to help keep it in place when assembled. If you don't want the adapter to move, a little super-glue is your best bet.