Tin coil support

Ücretsiz STL Diğer

11 görüntülenme

Bu model Cults3D üzerinde barındırılıyor. Dosyalar, görseller ve lisans bilgileri tasarımcısına aittir.

Açıklama

A REDESIGN IS IN PROCESS, COMING SOON !!!! Aesthetic design, easy and practical, which differentiates it from the classics on the market. Aesthetic design covers the tin coils and prevents tangling with proper use. Facilitates the rewinding of the tin thanks to the side handle. Allows you to keep your tin handy and your work table tidy. There are different models and accessories, depending on the user's need. Can without brackets (no screws required). Basic size: 87mm x 104mm x 98mm Assembly instructions included. Compatible coils, see photos: - Diameter, 63mm diameter coils only. - Width, less than or equal to 57mm wide. - Tested with tin wire from 0.25mm diameter. Additional material required: Hardware is required to assemble the model to the tower, nuts, lag bolts, etc. The example model carries the following, see photos: 3x M4x10 screws 2x screw M3x10 3x Threaded insert M4 2x Threaded insert M3 Rubber feet to prevent slipping.

Bu model hakkında

Tin coil support, Cults3D topluluğunda paylaşılan ücretsiz bir Diğer 3D modelidir. 3D baskı için indirebilir ve orijinal lisans koşulları çerçevesinde kendi projelerinde kullanabilirsin.