Jedi Survivor loot crate

Açıklama

PLEASE READ: This is a set of 3D printable files for loot crates scaled to both large scale, and 1/6 scale. Please note that this is a 3D file and not a physical product. The files will become available to you as soon as payment is complete. IMPORTANT: You will need ti source materal for the hinges. The large scale model accepts 1/8th inch metal rod cut to 30mm long each. The 1/6 scale model is made to accept 1.5 mm rod cut to 17mm in length. The 1.5mm rod can be purchased at most hardware stores. It is commonly used for irrogation flags. You will need two rods per model. The large scale crate is not life sized as these crates scale to waist height on an average person. The larger crate is approximately 9”x8”X9.5”. The large crate is designed to fit in a 256mmx256mmx256mm print bed. All parts were tested on a printer. The quality of your print depends on your preferred slicer software, printer, and settings. I can not guarantee the quality of your finished print. This is a very detailed and intricate print so some of the fitting joints may be tight or loose depending on your printer and settings. The print is split up into several parts so sanding and gluing will be needed for fitment and a clean finish. The construction itself may be challenging for some. Some of the parts are complex and orientation on a print bed to get the best print result can be a challenge for some. This print is to be used by the purchaser only and is not to be sold or distributed without proper…