OPD Printer Mount by Seabass Will

OPD Printer Mount by Seabass Will

Ücretsiz STL Gadget ve Aksesuar
  • 22 görüntülenme

Bu model MyMiniFactory üzerinde barındırılıyor. Dosyalar, görseller ve lisans bilgileri tasarımcısına aittir.

MyMiniFactory üzerinde görüntüle ↗

Açıklama

A mount for OPD's printer. Square version goes into a .75 inch square hole, same that is both on the cabinet and the carts. (Old version an looks chunky.... I dont like it but it works lol) GMD cart version goes onto the thing that holds the GMD totes. It can be stuck on permanently with thick double sided tape. The nub has a tendency to break, reccommend making a couple extra just in case Required Hardware- Square Version 1x 1/4 inch nut 1x 1/4 inch bolt 1x 3mm nut 1x 3mm bolt - GMD Cart Version 1x 3mm nut 1x 3mm bolt* optional: 1mm thick double sided tape * length determines how far the nub sticks out. | Download free and paid 3D printable STL files

Bu model hakkında

OPD Printer Mount by Seabass Will, MyMiniFactory topluluğunda paylaşılan ücretsiz bir Gadget ve Aksesuar 3D modelidir. 3D baskı için indirebilir ve orijinal lisans koşulları çerçevesinde kendi projelerinde kullanabilirsin.

Dosya formatları

  • STL — 3D baskı için en yaygın mesh formatı — neredeyse her yazıcıda dilimlenip basılmaya hazır.

Bu modelin dosyaları MyMiniFactory üzerinde barındırılır. Orijinal sayfayı açıp indirmek için yukarıdaki düğmeyi kullan.

Benzer modeller