STM32 autonomous drone cover (version 1)

STM32 autonomous drone cover (version 1)

Ücretsiz STL Araçlar
  • 19 görüntülenme

Bu model Cults3D üzerinde barındırılıyor. Dosyalar, görseller ve lisans bilgileri tasarımcısına aittir.

Cults3D üzerinde görüntüle ↗

Açıklama

This is a cover for the DJI450 frame with design for the STM32 autonomous project of Joop Brokking. At the front of the cover you have place for the leds of the drone, and at he top of the cover you have a place for the barometter (with additonal cover here) and to the GPS. I added place for a switch for the programming selection( top back), and for the programming pins (at the side). The PCB inside available in my Circuit maker project: STM32 autonomouse PCB free

Bu model hakkında

STM32 autonomous drone cover (version 1), Cults3D topluluğunda paylaşılan ücretsiz bir Araçlar 3D modelidir. 3D baskı için indirebilir ve orijinal lisans koşulları çerçevesinde kendi projelerinde kullanabilirsin.

Dosya formatları

  • STL — 3D baskı için en yaygın mesh formatı — neredeyse her yazıcıda dilimlenip basılmaya hazır.

Bu modelin dosyaları Cults3D üzerinde barındırılır. Orijinal sayfayı açıp indirmek için yukarıdaki düğmeyi kullan.

Benzer modeller