Picture / Poster Frame

Picture / Poster Frame

Ücretsiz STL Diğer
  • 18 görüntülenme

Bu model Cults3D üzerinde barındırılıyor. Dosyalar, görseller ve lisans bilgileri tasarımcısına aittir.

Cults3D üzerinde görüntüle ↗

Açıklama

Custom poster / picture frame. Frames consist of 4 corner pieces and straight pieces. Combine the pieces together to make a frame of the size of your choosing. To size your picture or poster, measure the height and width, then print the corner and straight pieces that will add up to those dimensions. Two corner pieces plus the straight pieces. For example, for an 8.5 x 11 inch picture, you can use the 2" corner pieces and one 4.5" piece for the width, and the corner pieces and one 7" inch piece for the height. Pieces are a tight fit. May require a small bit of filing. Can then tap together with a hammer. Should not require and glue. Model includes different clip sizes to secure the picture to the frame. For my poster frame I cut out a thin piece of plexiglass, added the poster, added a backer board (hardboard), added the clips with 1/4" long wood/metal screws, and then added a sawtooth hanger.

Bu model hakkında

Picture / Poster Frame, Cults3D topluluğunda paylaşılan ücretsiz bir Diğer 3D modelidir. 3D baskı için indirebilir ve orijinal lisans koşulları çerçevesinde kendi projelerinde kullanabilirsin.

Dosya formatları

  • STL — 3D baskı için en yaygın mesh formatı — neredeyse her yazıcıda dilimlenip basılmaya hazır.

Bu modelin dosyaları Cults3D üzerinde barındırılır. Orijinal sayfayı açıp indirmek için yukarıdaki düğmeyi kullan.

Benzer modeller