HyperCube Evolution Refurbishment 2022 - SMT M 🦊

Açıklama

After 2 long hard years of service I decided my HEVO needed some TLC. Within the refurbishment I Klipperised the HEVO so I also had to revise my Electronics Enclosure design. The wire management of the HEVO is so much easier without a display. The Parts I have revised are: 1.Easy Access Electronics Enclosure 2.PSU Stand Holder with Individual USB feed if required. 3.Wire Management Clip System to tidy up cables along the Extrusion slots. 4.Modified Z Axis Linear Rail Mount to allow cable pass through for End Stop Feeds. 5.New Flexible Hot End Mount with lots of fixing points rather than 3mm studs. 6.Manta MK2 & Boothy Mini Hot End assemblies (Primarily for the Dragon & Orbiter V1.5). 7.Revised Z motor Mount to increase Z height if required. Video Here: https://www.youtube.com/watch?v=irDnK233_Uc I have also revised the original mounting plate to include lots of fixing points for future proofing. I have included optional Hot Ends for Both My Manta MK2 design and a even more compact option using 3010 turbo part cooling fans. Please note the Rear Mount in the Mini Hot End step file as a mounting centre reduced by 0.4 mm because I had some slight binding with the X gantry. The mount in the Manta Mkl2 step is standard. I thought I would upload both for flexibility. I hope that some of the community may find these shared files useful. Due to the complex number of parts and my limited time I have uploaded only the step files for each upgrade so this thing should be…