Raspberry Pi Zero W case with profile mount

Raspberry Pi Zero W case with profile mount

Ücretsiz STL Gadget ve Aksesuar
  • 14 görüntülenme

Bu model Cults3D üzerinde barındırılıyor. Dosyalar, görseller ve lisans bilgileri tasarımcısına aittir.

Cults3D üzerinde görüntüle ↗

Açıklama

Hello This is case for Raspberry Pi Zero W or WH v 1.3. You can mount it to the profile 2020, v-slot, T-slot, 3030, etc. For assembly you will need: - 4 M2.5х12mm screw; - 4 M2.5 nut. Remember to increase the size of the parts in the slicer to compensate for the shrinkage of the plastic as it cools. For ABS, this is about 0.5 - 1%.

Bu model hakkında

Raspberry Pi Zero W case with profile mount, Cults3D topluluğunda paylaşılan ücretsiz bir Gadget ve Aksesuar 3D modelidir. 3D baskı için indirebilir ve orijinal lisans koşulları çerçevesinde kendi projelerinde kullanabilirsin.

Dosya formatları

  • STL — 3D baskı için en yaygın mesh formatı — neredeyse her yazıcıda dilimlenip basılmaya hazır.

Bu modelin dosyaları Cults3D üzerinde barındırılır. Orijinal sayfayı açıp indirmek için yukarıdaki düğmeyi kullan.

Benzer modeller