Assemblable drawer blocks 4 levels Mixed (Kit)

Açıklama

It consists of 3 blocks of mixed drawers, assemblable in the four directions. They are joined by means of a hallen head screw (5) and hexagonal nut. There is also a screw and nut to cover unused external holes. By using the minimum of filament and a design that gives priority to strength, functionality and aesthetics, a set of blocks with drawers of high quality and durability is achieved. The blocks are available in sizes 10cm high, 10cm deep and widths 5, 10, 15 and 20 cm. The drawer is common for all blocks, existing with or without separator. On the front there is a viewer to accommodate the contents label. The drawer panel is housed inside the block and only the handle is exposed to the outside. All blocks can be fixed to the wall at the bottom, where the upper part of the block has a reinforced material that allows drilling holes as required. The sides are reinforced and the drawers have trays on which to move smoothly, the stop prevents the drawer from sliding out on its own. The anchor nuts fix two blocks to be joined and the screw firmly reinforces the joint between blocks, it is not necessary to cover all the joint points. A minimum of 3 walls and 35% in print density are recommended. Assemblable drawer block kits currently in my profile: 4 Levels https://cults3d.com/en/3d-model/tool/bloques-de-cajones-ensamblables 4 Mixed Levels https://cults3d.com/en/3d-model/tool/bloques-de-cajones-ensamblables-4-niveles-mixtos-kit 4 Levels Wide…