Arcade1UP HDMI Controller Mount

Arcade1UP HDMI Controller Mount

Ücretsiz STL Gadget ve Aksesuar
  • 14 görüntülenme

Bu model Cults3D üzerinde barındırılıyor. Dosyalar, görseller ve lisans bilgileri tasarımcısına aittir.

Cults3D üzerinde görüntüle ↗

Açıklama

HDMI Controller Board not included. This is for a 3d printed Arcade1UP HDMI Controller mount. You can then attached the mount to the factory lcd monitor housing where the original Arcade1up PCB board was. What's needed: - Mount for HDMI Controller board - 6 - M3x8mm screws - 2 - M3x12mm screws to attach bracket to Arcade1UP LCD - Allen Key It will fit any monitor where the screws for the stock board are between 5.2" (132mm) and 5.9" (150mm). Additional Information: You can get the HDMI Controller board from here on Amazon: https://www.amazon.com/dp/B07ZVMWPZP Just make sure you pick the right board based on the model of your monitor.

Bu model hakkında

Arcade1UP HDMI Controller Mount, Cults3D topluluğunda paylaşılan ücretsiz bir Gadget ve Aksesuar 3D modelidir. 3D baskı için indirebilir ve orijinal lisans koşulları çerçevesinde kendi projelerinde kullanabilirsin.

Dosya formatları

  • STL — 3D baskı için en yaygın mesh formatı — neredeyse her yazıcıda dilimlenip basılmaya hazır.

Bu modelin dosyaları Cults3D üzerinde barındırılır. Orijinal sayfayı açıp indirmek için yukarıdaki düğmeyi kullan.

Benzer modeller