Ventriloquist Dummy-"MR. BLUSTERMAN""

Açıklama

This is a ventriloquist dummy character called MR. BLUSTERMAN. His character might be a goofy expert who gets everything wrong. Or maybe a train conductor that can't tell time. The face might also become an aging female rock star. MR. (or MRS.) BLUSTERMAN can be 3D printed and assembled. The head is sized to create a full-size ventriloquist figure. The components include a head, jaw, eye tray, trap door, a neck transition with a 1-inch hole, and another transition with a 1.25-inch hole. In addition, there are holes and guides to make the installation of animation mechanics easy, including moving jaw, moving eyes, and moving eyebrows. The holes in the cheeks and jaw will line up The head is designed for 1.5" eyes. Eyes are not included, but Braylu Creations (www.braylu.com) is an excellent source for finished (painted) 1.5-inch eyes. The holes were sized for 3/32" brass rods and 1/8" brass tubes. If you'd prefer to use heavier brass stock, use the holes as guides. IF YOU WOULD LIKE SOMEONE ELSE TO PRINT: Contact DAVE ALLEN at davethemagicman@yahoo.com FINISHING TIPS: This will not be a paint-ready 3D print, ready to assemble. BUT IT'S AN EXCELLENT HEAD-START! HOW TO HIDE THE 3D PRINT LINES: Method 1: I have used Bondo Gray Primer and Filler. Apply 3 or 4 coats with light sanding between each coat. Method 2: Jeff Dunham’s method may require less sanding. He uses wood putty (like DAP DryDex® Wood Filler) to hide the 3D-print lines. He mixes the putty with acetone. Be advised…