Umarex T4E XT50 X-tracer 50, Umarex T4E Umarex HDR50 / tr50 UNWP90 edition tracer mount
- 13 görüntülenme
Bu model Cults3D üzerinde barındırılıyor. Dosyalar, görseller ve lisans bilgileri tasarımcısına aittir.
Cults3D üzerinde görüntüle ↗Açıklama
this mount makes it possible to mount a tracer unit on your HDR50 with the UNW-P90 mag kit, that can also simulate gun flashes making also usable with normal paint at low light conditions it doesn’t have to be pitch black. but I don’t think there is a tat you will see it’s effects on a open field in the middle of the day. but in a building this should be a different story even during the day. but of course it will be more noticeable how darker it’s the gun flash simulation works on the fact that it lightens up the gas cloud a paintball marker makes. so the more air volume is going out of the marker and how more it forms a cloud the bigger the blast effect is. note this really a short blast. so if you blink you will mis it haha. and some times cameras happen to mis the shot. but well that is why you have more than 1 rounds haha… - tracer options for 50 cal you got for what I have tested now 2 options for the 50 cal markers the ACETECH Blaster is 32mm OD. and can only trace green glow in the dark rounds, and make orange colored gun flashes (works for 43 cal and 50 cal) the Umarex T4E X-tracer 50 haves a OD 32mm this one is very similar to the Acetech Blaster. but the threads a lager so it stronger mount. and can only trace green glow in the dark rounds, and make orange colored gun flashes (works for 43 cal and 50 cal) - compatibility note make sure you select the right marker model since they all need to be costume made so that barrel alines with the tracer properly! and…
Bu model hakkında
Umarex T4E XT50 X-tracer 50, Umarex T4E Umarex HDR50 / tr50 UNWP90 edition tracer mount, Cults3D topluluğunda paylaşılan ücretsiz bir Gadget ve Aksesuar 3D modelidir. 3D baskı için indirebilir ve orijinal lisans koşulları çerçevesinde kendi projelerinde kullanabilirsin.
Dosya formatları
- STL — 3D baskı için en yaygın mesh formatı — neredeyse her yazıcıda dilimlenip basılmaya hazır.
Bu modelin dosyaları Cults3D üzerinde barındırılır. Orijinal sayfayı açıp indirmek için yukarıdaki düğmeyi kullan.