Hose hanger for pump hose

Hose hanger for pump hose

Ücretsiz STL Düzenleyici ve Saklama
  • 17 görüntülenme

Bu model Cults3D üzerinde barındırılıyor. Dosyalar, görseller ve lisans bilgileri tasarımcısına aittir.

Cults3D üzerinde görüntüle ↗

Açıklama

This is a design for those who have a PCP rifle pump and do not like to let the hose of this lying on the floor, that is why we created this small design so that the hose is no longer lying and avoid being stepped on. Also this piece has a perforation to put a screw in case you want to leave it a little tighter. The design of the photo was printed in scale 10, if you think that in that scale it is too big or too small try a different scale. (Scale 10 is in the creality program) The measurements of scale 10 will be in the "parameters" part.

Bu model hakkında

Hose hanger for pump hose, Cults3D topluluğunda paylaşılan ücretsiz bir Düzenleyici ve Saklama 3D modelidir. 3D baskı için indirebilir ve orijinal lisans koşulları çerçevesinde kendi projelerinde kullanabilirsin.

Dosya formatları

  • STL — 3D baskı için en yaygın mesh formatı — neredeyse her yazıcıda dilimlenip basılmaya hazır.

Bu modelin dosyaları Cults3D üzerinde barındırılır. Orijinal sayfayı açıp indirmek için yukarıdaki düğmeyi kullan.

Benzer modeller