Muzzleloader Flintlock Toy Gun

Açıklama

Experience loading the gun through the muzzle with a ramrod like a pirate or pioneers did, and remember not to go off half-cocked :). This functioning toy muzzleloader is 100% 3D printed, easy to print, assemble and disassemble, feels good in the hand and fun to shoot. I put test shooting video (https://www.youtube.com/shorts/ozfB0kIj-2Q) on Youtube with better quality and sounds for a better representation of what's like shooting the toy gun. Everything that is needed is included in this design. No screws, no rubber bands. Easily printed with PLA Plus (PLA+). No support is required. Total print time is about 10 hours on fast coreXY printers and 36 hours on regular cartesian printers. The optional bullet stand takes about another hour on fast printers and 6 hours on regular printers. Assembly is simple and requires no tools. In fact after having done a few times, one can assemble it in under two minutes. Shooting distance is about 6-8 yards/meters, depending on how fresh the mainspring coil is. Great for indoor shooting at empty beer/coke cans, cups or targets for fun. The toy gun can be easily disassembled to replace worn-out parts such as a spring that has lost power. Disassembly needs a flathead screwdriver and may need a pair of tweezers. The hammer is shaped like a wolf head. Decorative design showing a wolf howling at full moon runs along the barrel. STL files, along with instructions for printing, assembly, operation, and disassembly, are in the ZIP file for download…