Ventriloquist Dummy-"CHUBBY"

Açıklama

This is a ventriloquist dummy character that can be 3D printed and assembled. It is sized to create a 2T ventriloquist figure. The components include a head, jaw, teeth and tongue, eye tray, trap door, and neck transition piece. In addition, there are holes and guides to accommodate the installation of animation mechanics including moving jaw, moving eyes, and moving eyebrows. I JUST ADDED A BONUS HEAD THAT HAS FRONT TEETH. Eyes are not included, but Braylu Creations (www.braylu.com) is an excellent source for painted and finished 1-inch eyes. The holes were sized for 3/32" brass rods and 1/8" brass tubes. The holes in the cheeks and jaw will line up. If you'd prefer to use heavier brass stock, use the holes as guides. IF YOU WOULD LIKE SOMEONE ELSE TO PRINT: Contact DAVE ALLEN at davethemagicman@yahoo.com 3D PRINTING SETTINGS IF YOU PRINT YOURSELF: The files can be decreased or increased in size to make a larger or smaller dummy. Just be sure to scale each component by the same percentage. If you choose to increase the file size: - You may need to use brass rods and tubes of a larger diameter. - The hole for the control stick in the Transition will need to be increased prior to printing to accommodate the control stick. If you choose to decrease the file size: - New holes will need to be drilled to accommodate the brass rods and tubes for the mechanics. Use the current holes as guides. - The hole for the control stick in the Transition will need to be increased prior to…