CTC I3 Slim E3D Mount

Açıklama

This is a mount I've made that mounts a E3D V6 to the CTC I3 Pro B. It's been redesigned a couple of times to make it fit properly. The core design is inspired by Tech2C's E3D mount. For mounting you need 2 M3 25 or 30 mm screws, 2 M3 nuts and 2 M3 washers (Max OD 7mm), for the fan you need 2 M3 25mm screws, 2 M3 square nuts and 2 M3 washers, for the fanduct you need 2 M3 10-16mm scews and 2 washers. To mount the heatend you need 2 M4 16-25mm, 2 M4 square nuts (I don't belive regular hex nuts would fit) and two M4 washers (Max OD 9mm). Some plans for the future is to make the 5mm distance into a mounting plate that fits other machines and to make it into an indexable part so that you don't have to change Z-height every time you remove the hotend. I have not mounted a BLTouch onto mine just yet so I don't know if the placement is correct. But it has been placed according to the plans that are on E3D and antclabs website. My mount is printed in PLA and I've added some aluminium foil to the surfaces that are close to the heated parts just as a precaution. Edit: Added two distance plates. One with offset nuts for the CTC I3 and one with only holes for hotend mount and square and hex nuts.