Fully Customizable Hook by Code and Make

Açıklama

Don't get hung up the next time you're trying to find somewhere to put your your keys, bag or jacket. Our latest design is here to help; a fully customizable hook! This design is completely free and shared under a permissive license. Your support is hugely appreciated. Did you know? Some of our designs cannot be found on MyMiniFactory. If you are looking for more, check out our premium projects: https://codeandmake.com/premium OpenSCAD Customizer Options This design has the following Customizer options: Material Material_Thickness - Thickness of the material Corner_Radius_Percentage - The size of the corner radius as a percentage Hook Hook_Inside_Diameter - The inside diameter of the hook Hook_Width - The width of the hook (unless the screw size commands larger) Hook_Lip_Shape - The shape of the hook lip Screw Screw_Hole_Diameter - The diameter of the screw hole Screw_Head_Diameter - The diameter of the screw head Screw_Head_Countersink_Angle - Screw countersink angle (82 and 90 are common) Design Considerations If printing without supports, we recommend using a low Corner_Radius_Percentage value, otherwise you may experience overhang issues. However, we recommend always setting a Corner_Radius_Percentage value of, say, at least ~10% to remove any sharp edges. You may need to experiment with the Corner_Radius_Percentage value and/or your printer settings to obtain the best results when printing without supports. Material We recommend printing this in a durable filament, such…