warrior - Arthur89

Açıklama

Nozzle temperature: 200-210°C (start at 205°C for good PLA flow without stringing). Температура стола: 60°C (50–60°C для первого слоя, чтобы обеспечить прилипание).​Cooling fan: 100% after 2-3 coats (for clear details).​Speed and height of the layerLayer height: 0.15–0.2 mm (to balance detail and speed on a figure ~20-30 cm high).​Print speed: 40-50 mm/s (slow down to 30 mm/s for external walls with spikes).First layer speed: 20 mm/s.​nfill (filling) of 15-25% (Gyroid or Grid) is enough for the strength of the figurine without excess plastic​Walls (walls) 3-4 perimeters For armor detailing​Retraction of 5-6 mm by 40-60 mm/s Minimizes filaments on the PLA