Small power box vent

Small power box vent

Ücretsiz STL Düzenleyici ve Saklama
  • 15 görüntülenme

Bu model Cults3D üzerinde barındırılıyor. Dosyalar, görseller ve lisans bilgileri tasarımcısına aittir.

Cults3D üzerinde görüntüle ↗

Açıklama

This is yet another small vent to be used to allow power supply boxes to breathe. My particular use is to install it in a Harbor Freight ammo box to cool the 12v power supply for pixel Christmas lights. The diameter of the threads is just under 1" so a 1" hole should work well. I printed the washer in TPU which will compress and seal the opening. The top of the vent is tilted away from the box to aid in rain runoff. There are no supports needed and printing of all of the parts should take about 2 hours.

Bu model hakkında

Small power box vent, Cults3D topluluğunda paylaşılan ücretsiz bir Düzenleyici ve Saklama 3D modelidir. 3D baskı için indirebilir ve orijinal lisans koşulları çerçevesinde kendi projelerinde kullanabilirsin.

Dosya formatları

  • STL — 3D baskı için en yaygın mesh formatı — neredeyse her yazıcıda dilimlenip basılmaya hazır.

Bu modelin dosyaları Cults3D üzerinde barındırılır. Orijinal sayfayı açıp indirmek için yukarıdaki düğmeyi kullan.

Benzer modeller