简介
Quick To Print Large Vice Notes: This design is primarily a good starting point for remixes and the OBJ files have been included print Settings: nozzle diameter: 0.40mm && 1.0mm layer height: 0.20mm && 0.75mm infill: 25% support: Yes only small amount though walls: 4 && 2 top and bottom layers: 3 to 4 material: PLA Parts Needed: NONE Special Instructions: print both the screw and nut with 0.2mm resolution on a 0.4mm nozzle print the nut at 102% scale file the screw ever so slightly where the layers start and end to clean up the edges print the vice body 0.75mm resolution on a 1.0 mm nozzle print the vice jaw with support in the cut out for the nut please feel free to leave comments and feedback please checkout my other designs: https://www.thingiverse.com/carter_383/designs please also consider donating a small amount to help allow me to turn this into a carer or please just leave me a comment with any advice on hoe yo improve my designs or ideas or new ones https://paypal.me/3DCarter383?locale.x=en_GB Links: printer: https://tinyurl.com/whd9ruaj filament: https://tinyurl.com/pr7d5cs6
About this model
Quick To Print Large Vice is a 免费 3D model in the 其他 category, shared by the Cults3D community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.
File formats
- STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.
The files for this model are hosted on Cults3D. Use the button above to open the original page and download it.
