Wall Clock

简介

Wall clock with manual mechanisms so that when opening the doors the bird comes out and when closing them it goes in. I have printed the model in 2 colors with an extruder, changing the color of the filament in Z: 150, except in parts 1,2 and 3 that have part of the roof and I have changed it in Z: 150.02. The dial I have changed the color of the numbers. I bought the watch mechanism in Aliexpress, I leave the link in case you are interested: https://es.aliexpress.com/item/33030261667.html?spm=a2g0s.9042311.0.0.f03463c0B13I1M I bought the number 35. I designed the hole for the mechanism with the following dimensions: 65x65mm without the upper curved part. The maximum complete size of the watch is 376,669mm high x 366,239mm x 150mm deep. The STLs I've left them ready to print in principle, but it will depend on the print size of each printer, etc. Everything is printed without supports except the bird. I set the quality to 0.2 I have printed the whole clock at 10% infill. The flexi arms, the doors, the connecting sticks, the board at 25% infill. the filling pattern I have set: octet The assembly is easy in the pictures you can intuit a little bit: THE STRUCTURE OF THE CLOCK is joined by sticks similar to those of the furniture, the sticks that are inserted vertically are 10mm ø, those that are inserted in the horizontal part are 6 and are 8mm ø. I recommend using a rubber hammer and carefully insert them until the end and the next piece fits well. The structure is from part 1…