Plain stackable geometric planter

Plain stackable geometric planter

免费 STL 家居生活
  • 15 次浏览

该模型托管于 Cults3D。文件、图片及许可信息归原创作者所有。

在 Cults3D 查看 ↗

简介

These are 100 mm cube prints with a 2mm thick wall. I would recommend printing them in ABS with 15% infill and then using acetone to smooth and seal the surface. These planters can be stacked together and have a break out notch if you want to use the drain holes. The stacking is 50% overhang so you would need a minimum of 3 to make it work.

About this model

Plain stackable geometric planter is a 免费 3D model in the 家居生活 category, shared by the Cults3D community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.

File formats

  • STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.

The files for this model are hosted on Cults3D. Use the button above to open the original page and download it.

相似模型