Block Minifig - Proff C

简介

I wanted to be able to print my own Minifigs but couldn't find a good STL for them, so I did a little bit of reverse engineering and now we can all print them.FDM printing:When printing, try to find the flattest surface and try to avoid too much support. I use a raft to help support the bodies. The torso and head can be printed upright, the hands laying on their wrists, the arms laying on their sides, and the legs on the flat side. You'll have to do a little sanding, but these have turned out pretty great so far.SLA or DLP:Print at angles. These parts are very small, so use minimal support (70% support structure with .04mm to. 03mm touch points).