简介
This is the larger version of https://cults3d.com/en/3d-model/home/book-hide-small for your-hiding-stuff-inside-a-book-needs! Create your own cover with your favourite CAD, simply by drawing a 54x70x1mm square, with 45 chamfered edge on the bottom! The book is assembled as follows: Separate the two sides of the Cover after printing. Remove the built-in supports under the hinge and the lock pin. Clean all finish all parts. Do a test fit, make sure the Upper and Lower Pins go in all the way without resistance and spin freely, and the pages fit nicely. Insert the pins and glue the Pages to the back cover (this goes over the pins ends, locking them in place). Hide your things. Toss a like, post a make and maybe follow me over at the IG's https://www.instagram.com/superbeasti/
About this model
Book Hide (Large) is a 免费 3D model in the 其他 category, shared by the Cults3D community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.
File formats
- STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.
The files for this model are hosted on Cults3D. Use the button above to open the original page and download it.
